Table of Contents
Advertisement
3.6.6 Calling
3.6.7 Auto ASCII File
POSTAZIONEserialnumber_FROM_YYYY-MM-DD_HH-mm_TO_YYYY_MM_DD_HH-mm.TXT
When the PC Calling function is enabled, every time the station is called
using the CALL or "Scheduled CALL" commands, the data present on the
station - and recorded since the latest download - will be automatically
downloaded to the PC.
This can be very useful because it makes unnecessary to remember the
time of the latest download.
After having completed the automatic download, the station does not hang
up immediately but remains linked until either the call is ended manually or
for 2 minutes after the last operation.
Select Auto ASCII File to automatically generate an ASCII file and, if
enabled, a .bmp file too, containing all the information relative to the data
downloaded; the format will be the same adopted with the "Save Export
File Setup" function, when displaying monitoring results starting from the
calendar.
When displaying results, the function "Save Export File Setup" is available
on the main menu, under the File menu command.
When a call, either incoming or outgoing, is reported by the station and the
data are downloaded manually or automatically, all the files normally placed
in the directory Station Name\Year\Months\Day are also copied in the
special directory called Station Name\AUTOTXT.
When all the data have been downloaded, the files in the directory Station
Name\AUTOTXT are grouped in a single file .RS9 which displays a graph
having as its starting and ending date and time the date and time of the
download. This will be used to create the file .TXT that, identified with a
specific name containing the time and date of the download and the serial
number of the station generating it, will be saved in a special directory
called AUTOFILE, common for all the stations and placed at the same level
as their specific directories.
The file name appears in the following format:
Every time the data are downloaded with the AUTO ASCII FILE function
enabled, a new .TXT file will be created with a specific name, saved in the
AUTOFILE directory and containing the data acquired by the station from
the Start to the Stop time of the download.
If you enter the command /AUTOBMP in the destination field of the
properties with the AUTO ASCII FILE function enabled, the software
provide a .txt and .bmp file at the same time. The bitmap is created with
the settings used to create the same file for the manual mode.
It will be saved in the AUTOFILE directory and placed at the same level of
the txt file.
8061SW-02 - User's guide and Data Display
3-21
Advertisement
Table of Contents
