Table of Contents
Advertisement
The message in the status
window is:
7-8
Troubleshooting
8061SW-02 Examples of error and information messages
Many phenomena can affect good communications between the modem of
the monitoring station and the PC.
The selection of the port on which the modem is connected can generate a
series of error messages.
If the PC modem is off or the software is searching for the modem on a
different serial port than the one to which the modem is physically
connected, the message is:
The same message also appears when the User wish to make a local
wired connection to the monitoring station.
Answering YES, the software tries to connect the station via serial RS232,
USB, Ethernet port, and if there is no connection, the next message is:
If the station does not answer because it is off or the batteries are
completely down the message will be:
In case of error in data transmission this message will appear:
The control of the checksum guarantees the quality of the data received.
When this error occurs, sometimes the 8061SW-02 software closes the
application and exits.
Advertisement
Table of Contents
