Table of Contents
Advertisement
4 – First connection -
Point to Point and FTP communication
4.1 General
This chapter describes the manual procedure for the Point to Pint or FTP
Information
configuration of the AMS-8061 Area Monitor. Both can be automatically
set by using the NardaAMConfigurator (see §2.14).
The AMS-8061 Area Monitor has been developed to be mainly used in FTP
mode with the use of a SIM card.
Is it possible to use it also in other modalities like Point to Point but with some
limitations.
With this area monitor you can work in Point-to Point mode or FTP mode,
using the 4G modem or also via USB/RS232/Ethernet cable.
FTP means File Transfer Protocol, in this mode there is no direct connection
between the area monitor and the computer. The area monitor will send all
data on a FTP server where they lies up to the user will use the software to
download them.
To work in this mode you need a FTP server and a SIM card in the area
monitor modem with an internet data subscription. Make sure the PIN code of
the SIM card in use has been removed.
Please refer to chapter 3 of this manual for further information of using
8061SW-02 software
Fig. 4-1 FTP communication mode
Document AMS8061EN-10112-1.29 - © NARDA 2021
Point to Point and FTP Communication
4-1
Advertisement
Table of Contents
