Led Ethernet Status; Led Micro Sd Card Status - L3Harris NARDA AMS-8061 User Manual

Led ETHERNET status

Led MICRO SD status
This Led let the user know about the Ethernet status as shown in the
following table.
TABLE 2-1 Led Ethernet status
LED
Steady GREEN
The Led let the user know about the state of process as shown in the
following table.
TABLE 2-2 Led Micro SD card status
LEDs
Blinking RED DATA is being storing
Steady RED SD Card ERROR
Steady ORANGE SD Card ERROR
Keep in mind that when storing all tasks are suspended thus it is better to
limit the size to the minimum required to avoid missing data.
Once more, do not leave the SD-Card in the slot as it would not store
anything more, as the storing process is triggered only by SD-Card insertion.
Instead, it would stop GSP activity and draw energy reducing thus the
autonomy.
Status Action
Ethernet cable is connected
Status
*** DO NOT REMOVE the SD Card ***
This can be caused by:
• SD-card not formatted FAT or FAT32
• Damaged SD-Card
This can be caused by:
• File "SD8061.SD1" not present.
• Non-Writable SD-Card
Installation and use
Action
2-21