Table of Contents
Advertisement
5.7 D61 Structure,
Download
description
5.7.1 Command Mode
Sintax
?FLS HH:mm,dd/MM;n Request for n samples starting from Hour HH and minute mm of the day dd of
5.7.2 FTP Mode
This paragraph describes the structure of a multiband record.
These records are created by either FTP enabled (files D61) or "?FLS"
command.
the month MM of the current year. In case MM is higher than current month,
the referred year is the past one.
For example, the command #SM ?FLS 13:00,01/08;60* asks for 60 measures
starting from 13:00 of the 1
This answer is a block of binary data
The block of bytes in replying to #SM ?FLS HH:mm,GG/MM;n command
is as follows:
A Header: made of #SM FLS=*<CR><LF> (11 bytes)
A series of (32 bytes + 16* Number of Bands) per sample as shown in the
following table.
A final Checksum as described at the end of this document.
At FTP schedule a file named HH_mm_dd_MM_yy_.D61 is created (see
§5.6 FTP on Area Monitor System AMS-8061).
This file contains ( 32 + 16* Number of Bands ) * n bytes (where n is the
number of requested records).
All figures in this document are LITTLE ENDIAN
Description
st
of August
SMS Messages and Commands
5-35
Advertisement
Table of Contents
