Table of Contents
Advertisement
What happen when I do not use the option "Run Administration"
The User might have the need of administrator privileges to install and use
the software 8061SW-02.
From last Windows versions (after XP) every software must be installed
with the option "Run as Administrator". Also to be used, you have always to
choose the option "Run as Administrator". This is a security control
introduced in Windows.
When you do not use this option, all program files are created in a parallel
folder.
So with the option "Run as Administrator" the program folder used has the
following path:
C:\Program Files (x86)\(folder program)
Without this option the folder used is:
C:\Users\(nome
utente)\AppData\Local\VirtualStore\Program
Files
(x86)\(folder program)
In addition, on some computer, the folder AppData is not visible, it is
hidden.
Without the correct installation and use the program could not find some
important file and have some problems during the normal utilization
For installing and running the software with administration privileges see
paragraph 3.3 .
When I open the software, some sections are not active.
- Verify to have pushed the button Enable setting.
- Verify the area monitor is correctly set to work in Point to Point mode or in
FTP mode. The choice of one mode can exclude some parts of the
software when used in the other mode.
Example:
When the AMS-8061 is set to work in FTP mode and you use the software
in Point to Point mode, via cable, the section "Schedule for modem" is not
active.
7-6
Troubleshooting
Advertisement
Table of Contents
