newterra ltd.
1291 California Avenue, Brockville, ON K6V 5W3
(800) 420-4056 / www.newterra.com
5.10.6 Blower Control
5.10.7 CIP Cleaning
Note: At design flow when the membrane discharge vacuum exceeds 0.2 bar (80" WC), as
transmitted by VT-701, VT-702 and indicated locally at PI-701, PI-702, it is necessary to take
the membrane tank offline for CIP cleaning. See Section 7 for instructions on CIP cleaning.
newterra O&M Manual
69
© 2017 by newterra, ltd.
All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission of newterra ltd.