newterra ltd.
1291 California Avenue, Brockville, ON K6V 5W3
(800) 420-4056 / www.newterra.com
5.9 Post-Anox Tank (TNK-551) Module
The schematic of the Post-Anox Tank (TNK-551) is located on the AERATION HMI screen and
shown below.
5.9.1 Function
Mixed liquor flows by gravity from the second aeration tank (TNK-502) to the post-anoxic tank
(TNK-551) for final denitrification polishing. In the post-anoxic tank, there are minimal dissolved
influent organics to drive the denitrification process. As such, an external carbon source in the
form of Micro C is dosed (by P-6103) to supplement the organics and drive the denitrification
process.
5.9.2 Inputs
None
5.9.3 Setpoints
None
newterra O&M Manual
61
© 2017 by newterra, ltd.
All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission of newterra ltd.