ProMinent DULCOMETER PH-501 Assembly And Operating Instructions Manual page 431

SDS00404 - ALS Aluminum Sulphate Preparation Date: 07/Nov/2017
_____________________________________________________________________________________________
Small spills: soak up with absorbent material and scoop into containers. Large spills : prevent contamination of
waterways. Dike and pump into suitable containers. Clean up residual with absorbent material, place in appropriate
container and flush with water. Neutralize with lime or limestone powder.
7. HANDLING AND STORAGE
Precautions for safe handling
Empty containers may contain hazardous product residues. Use appropriate personnel protective equipment. Wash
thoroughly after handling. Avoid contact with eyes, skin and clothing.
Conditions for safe storage, including any incompatibilities
Place away from incompatible materials. Containers of this material may be hazardous when empty since they retain
product residues (vapors, liquid). Suitable material: Stainless steel, rubber-coated steel, plastic, plastic with fiberglass
reinforcement. Unsuitable material: Common metal. Do not store in aluminum, copper, copper alloys and galvanized
containers. Shelf life: 12 months in original, sealed container. Keep at temperatures between 0 and 30 °C. Reason:
Quality.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
.
Exposure Limits
Chemical Name Alberta OEL British Columbia Ontario Quebec OEL Exposure Limit - Immediately
OEL ACGIH Dangerous to Life
or Health - IDLH
Sulfuric acid, TWA: 2 mg/m Not available Not available TWA: 2 mg/m Not available Not available
3 3
aluminum salt
10043-01-3
Consult local authorities for recommended exposure limits
Appropriate engineering controls
Engineering controls
Local exhaust ventilation as necessary to maintain exposures to within applicable limits.
Individual protection measures, such as personal protective equipment
Eye/face protection
Chemical goggles; also wear a face shield if splashing hazard exists.
Hand protection
Appropriate chemical resistant gloves should be worn.
Skin and body protection
Skin contact should be prevented through the use of suitable protective clothing, gloves and footwear, selected for
conditions of use and exposure potential. Consideration must be given both to durability as well as permeation
resistance.
Respiratory protection
If exposure exceeds occupational exposure limits, use an appropriate NIOSH-approved respirator.
_____________________________________________________________________________________________
English / WHMIS2015 Page 4 / 9