newterra ltd.
1291 California Avenue, Brockville, ON K6V 5W3
(800) 420-4056 / www.newterra.com
5.12 Setpoints
The system Setpoints can be accessed from the SETPOINTS menu option.
5.12.1 PLC Date & Time
The PLC Time and Date can be adjusted from the SETPOINTS HMI screen. Below is an
example of the screen that will appear for the operator.
newterra O&M Manual
72
© 2017 by newterra, ltd.
All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission of newterra ltd.