4.5
Connecting sensors
Fig. 7: Connecting sensors
The sensor's plug-in connections are high-ohmic inputs. The plug-in connections need to be clean
and kept free of moisture or corrosion.
1.
Fit the plug onto the socket.
2.
Rotate the plug 90° to lock the plug in place.
3.
Carry out the same procedure for the second plug if you need to.
4.6
Potential-free switch connector (e.g. remote control)
SPDT1: The SPDT1 input is assigned to the remote control contact.
SPDT2: The SPDT2 input is assigned to the base valve or the suction lance of the pH storage tank.
SPDT3: The SPDT3 input is assigned to the base valve or the suction lance of the ORP storage
tank.
Mounting and installation
Ph
REDOX/
ORP
A2799
23