Personal Protective Equipment (Ppe); Head Protection; Eye And Face Protection - ProMinent DULCOMETER PH-501 Assembly And Operating Instructions Manual

Compact controller
Table of Contents

Advertisement

2.2

Personal Protective Equipment (PPE)

Personal protective equipment (PPE) refers to protective clothing, gloves, helmets, goggles, or
other garments or equipment designed to protect the wearer's body from injury or infection. The
hazards addressed by protective equipment include physical, electrical, heat, chemicals,
biohazards, and airborne particulate matter. "Protective clothing" is applied to traditional
categories of clothing, and "protective gear" applies to items such as pads, guards, shields,
masks, and others.
The purpose of personal protective equipment is to reduce employee exposure to hazards when
engineering and administrative controls are not feasible or effective to reduce these risks to
acceptable levels. PPE is needed when there are hazards present. PPE has the serious
limitation that it does not eliminate the hazard at source and may result in employees being
exposed to the hazard if the equipment fails.
The following list includes the minimum scope of PPE that should be available to system
operators:

2.2.1 Head protection

Hard hats, bump caps, or helmets are types of protection that should be considered if there is a
hazard of head injury. Head injuries can occur under various circumstances including as the
result of a slip or fall, working in confined areas or where there are low ceilings, where there
may be falling objects. Hard hats should be worn at all times when overhead work is being
conducted.

2.2.2 Eye and Face Protection

Eye protection with side shields should be used at all times while inside the newterra system as
there may be a danger of flying objects, particles, liquids, sprays or other matter entering the
eyes. Protection can take many forms including:
safety glasses,
goggles, or
full face protection. This should be used if handling chemicals, waste product or working
around pressurized lines (air of liquid).
newterra O&M Manual
© 2017 by newterra, ltd.
All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission of newterra ltd.
CRITICAL WARNING SIGN
Warns against an unsafe situation or
practice associated with severe injury as
well as major equipment damage.
WARNING
1291 California Avenue, Brockville, ON K6V 5W3
(800) 420-4056 / www.newterra.com
11
newterra ltd.

Advertisement

Table of Contents
loading

This manual is also suitable for:

986214

Table of Contents