Process Screens - ProMinent DULCOMETER PH-501 Assembly And Operating Instructions Manual

5.1.4 Process Screens

The main process screens are accessed from the main menu of the HMI control screen. These
process screens are:
Inlet
EQ & Anox
Aeration
MBR
Note: In the following sections are the detailed descriptions of the main processes.
Switches are indicated on the HMI as follows:
LSHH – level switch high high
LSH – level switch high
LSLL – level switch low low
TSLL – temperature switch low low
LSL – level switch low
PSL – pressure switch low
Status of the switches are indicated as follows:
Grey when OFF
Green when ON
RED when in Alarm
newterra O&M Manual
© 2017 by newterra, ltd.
All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission of newterra ltd.
1291 California Avenue, Brockville, ON K6V 5W3
(800) 420-4056 / www.newterra.com
newterra ltd.
39