Mounting and installation
6.2.2
Control panel installation
CAUTION!
Dimensional variations
Possible consequence: material damage
–
Photocopying the punched template can result in dimensional deviations
–
Use the dimensions according to Fig. 11 and mark on the control panel
CAUTION!
Material thickness of control panel
Possible consequence: material damage
–
The material thickness of the control panel must be at least 2 mm to ensure
secure fixing
The circumference of the housing has a 4 mm wide projecting face as a stop for the con‐
trol panel, with an additional circumferential groove to hold a caulking strip. When
mounted in the control panel, the entire front elevation extends about 35 mm from the
panel. Installation is from the outside into a control panel cut-out provided for this pur‐
pose. Using the fittings, the device can be secured to the control panel from the inside.
28