Operating And Display Elements - ProMinent DULCOMETER PH-501 Assembly And Operating Instructions Manual

7 Operating and display elements

1: Analogue display
- Display of the current system pressure in bar and PSI or mbar and inH2O.
2: LED ring
- Display of set point and reset point.
- Lag indicator function for maximum value or minimum value.
- Display of pulsating signals and pressure peaks.
- Trend display: rising pressure or falling pressure.
3: Indicator LEDs
- LED 1 = system pressure of the digital display in bar.
- LED 2 = system pressure of the digital display in mbar.
- LED 3 = system pressure of the digital display in PSI.
- LED 4 = system pressure of the digital display in inH2O.
- LED 6 = system pressure in % of the scaling (range ASP to AEP) or COF value in %.
- LEDs 5, 7 = not used.
- LED 8 = switching status OUT1 (lights if output 1 is switched)
4: Alphanumeric display, 4 digits
- Display of the current system pressure.
- Display of the parameters and parameter values.
5: Touch button Set*
- Setting of the parameter values (continuously by touching permanently; step by step by
touching briefly several times).
Mode/
Set
Enter
1
2
3
4
UK
5
6
E-1385
11