ProMinent DULCOMETER PH-501 Assembly And Operating Instructions Manual page 504

System Operation
(RUNNING/STOPPED) Indicates whether the system is currently in the RUN mode or
turned off
START button puts the system in RUN mode as long as there are no alarms preventing
the start up of the system
STOP button stops the system operation
RESET button is used to clear alarms after they have been addressed
Clarifier blowers, equalization tank blowers and the building fan if on, continue to run even
after the STOP
The MBR will always remain in auto run mode, unless the kill switch is pressed or power is
down.
The MBR will automatically restart after power failure.
A menu to navigate through the process and data information screens is provided at the bottom
right corner of the HMI screen.
When the MENU button is pressed, it shows a list of individual screens with a scroll bar.
To go to any of the listed screens, touch the icon.
To go back to the main screen, touch the X button.
newterra O&M Manual
© 2017 by newterra, ltd.
All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission of newterra ltd.
button has been pressed
1291 California Avenue, Brockville, ON K6V 5W3
(800) 420-4056 / www.newterra.com
newterra ltd.
37