Civil Checklist; Electrical Checklist - ProMinent DULCOMETER PH-501 Assembly And Operating Instructions Manual

4.4.1.2 Civil Checklist

Ensure that a potable water supply is available (used for hydraulic testing during start-
up, membrane cleaning, washing hands and for performing onsite testing).
Ensure availability of on-site emergency eyewash station and personal protection
equipment.
Remove hatch covers from the interconnecting ports.
All doors are closing, latching and locking
Weather stripping has been installed around each door
Door sweeps have been installed on each door
Louvers and hoods have been installed and sealed
Install Liquid Rubber Container Seal as per drawing at Appendix C.

4.4.1.2 Electrical Checklist

Connect electrical power to the Main Disconnect from available source ensuring correct
phase rotation (See Electrical Drawings at Appendix A for power source specifications).
Connect electrical power to the Control Panel (See System Layout drawing in
Appendices A for locations)
Ensure that proper electrical grounding and lightning protection is available.
Switch Main Switch Panel's isolator to the ON position.
Check all internal lighting and heating for correct operation.
Install packed external lighting into brackets above the doorways.
All internal electrical connections have been terminated
Confirm Phase Monitor is not in alarm
Site voltage measured:
o L1/L2 - L2/L3 - L3/L1 - L1/GRD - L2/GRD - L3/GRD:
Check field wiring and piping as per drawings
Check panel for loose wiring, Correct as required
Check voltage on AC transformer
Check voltage on DC transformer
Check I.S. barrier is grounded as per input drawing
newterra O&M Manual
© 2017 by newterra, ltd.
All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission of newterra ltd.
1291 California Avenue, Brockville, ON K6V 5W3
(800) 420-4056 / www.newterra.com
newterra ltd.
31