Mechanical Checklist; System Electrical Specifications - ProMinent DULCOMETER PH-501 Assembly And Operating Instructions Manual

4.4.1.3 Mechanical Checklist

All hoses and mechanical connections have been hooked up
Ensure all unions and fittings are tight, as some are loosened to prevent stress in shipping
Check alignment of motors, Correct as required
Check all motor belt tensions, Correct as required
Check alignment of pulleys for all belt driven blowers
Verify membrane modules are secure within the membrane tanks – i.e. verify wheel chocks
are in the correct location and that there is no lateral movement (less than an inch) of the
membrane modules on the wheel tracks in the tanks.
Confirm Tank Diffusers and Educators have not moved during shipping
Calibrate pH sensor

4.4.2 System Electrical Specifications

Verify site power per system design criteria. Additional detail is at Appendix A.
Please refer to the as-built electrical drawings in Appendices A of this manual.
newterra O&M Manual
© 2017 by newterra, ltd.
All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission of newterra ltd.
1291 California Avenue, Brockville, ON K6V 5W3
(800) 420-4056 / www.newterra.com
newterra ltd.
32