Assembly (Mechanical); Wall Mounting - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Assembly and installation
5.3

Assembly (mechanical)

The DULCOMETER
trol panel.
Tab. 2: Mounting materials (contained in the scope of delivery):
Description
Wall/tube retaining bracket
Half-round head screws 5x45 mm
Washer 5.3
Rawlplug Ø 8 mm, plastic
5.3.1

Wall mounting

Mounting (mechanical)
2
1
20
® Compact Controller is suitable for mounting on a wall, pipe or con‐
Fig. 1: Removing the wall/pipe bracket
1. Remove the wall/pipe bracket. Pull
the two snap-hooks (1) outwards
and push upwards
2. Fold out the wall/pipe bracket (2)
and pull out in a downwards direc‐
tion
3. Mark two drill holes diagonal to
each other by using the wall/pipe
bracket as a drilling template
4. Drill holes: Ø 8 mm, d = 50 mm
A0273
Fig. 2: Screwing on the wall/pipe bracket
using washers
Quantity
1
2
2
2
A0274