Loading The Current Configuration Using Xmodem - ADTRAN Total Access 544R System Manual

DLP-12 Loading the Current Configuration Using XMODEM
Introduction
The unit supports configuration uploads from a unit using a VT100 terminal or terminal emulator (with
XMODEM) and the
CRAFT
using the port and XMODEM.
CRAFT
Prerequisite Procedures
Obtain the configuration file (see for DLP-10, Loading the Current Configuration Using TFTP, for
details).
Tools and Materials Required
• VT100 terminal or PC with VT100 terminal emulation software
• XMODEM software
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
61200704L2-1B
interface. This DLP provides the steps for a successful configuration upload
© 2003 ADTRAN, Inc. 135