TFTP Configuration Storage/Retrieval Screen
TFTP Configuration Storage/Retrieval
Main Menu\System
Management\TFTP Configuration Storage/Retrieval\
The TFTP Configuration Storage/Retrieval screen (see
sioning information for the Total Access 1248 system to a remote TFTP server for possible
restoration at a later time. In addition to its obvious use for fast recovery of shelf provisioning
information, the TFTP Configuration Storage/Retrieval screen can be used to "clone" baseline
system configurations to new installations so that only a few system-specific provisioning
options need to be altered.
TID: TA1248
Unacknowledged Alarms: None
Press Space bar to enter TFTP address
Figure 5-43. TFTP Configuration Storage/Retrieval Screen
The TFTP Configuration Storage/Retrieval screen options are shown in
Table 5-43. TFTP Configuration Storage/Retrieval Screen Fields
Field
TFTP Server
TFTP Function
TFTP Filename
61179641L4-5B
Total Access 1248
TFTP Configuration Storage/Retrieval
TFTP Server:
100.100.100.100
TFTP Function: Retrieve
TFTP Filename:
Error Status:
Update Progress:
Description
Press the spacebar to enter the TFTP address.
This field is used to select the configuration function to perform
via TFTP. Options include the following:
• Retrieve - Restores the units provisioning information
based on the information contained in the specified TFTP
filename on the TFTP server.
• Store - Stores the units provisioning information contained
in the specified TFTP filename to a remote TFTP server.
Press the spacebar to select the configuration function to
perform.
This field is used to enter the filename to download from/to the
server via TFTP. The filename must end with a .cfg extension.
Press the spacebar to enter the filename.
Figure
5-43) is used to save provi-
Table
Menu Descriptions
5-43.
5-69