Installing Sfp Modules In The Unit - ADTRAN NetVanta 3148 Series Hardware Installation Manual

NetVanta 3148/4148 Series Hardware Installation Guide

Installing SFP Modules in the Unit

The NetVanta 3148/4148 Series units supports two SFP ports on the front of the unit. SFP
modules can be installed or removed without having to power off the unit.
Instructions for Installing SFP Modules in the NetVanta 3148/4148 Series
Step
1 Insert the module into the appropriate SFP port.
2 Press firmly to ensure that the module seats properly into the connector. There will be an
audible click when the SFP module is seated correctly.
The SFP ports are intended for use only with Class 1, safety listed/approved
optical transceiver products, rated 3.3 VDC.
Your NetVanta unit is now ready to be configured and connected to the network. For information
on configuration for a specific application, refer to the configuration guides provided on the
ADTRAN Support Community. For details on the command line interface (CLI), refer to the
Command Reference
supportcommunity.adtran.com.
617004148F1-34B
Guide. All other related documents are also available online at
Copyright © 2020 ADTRAN, Inc.
Action
Unit Installation
AOS
https://
21