Option Modules; Netvanta 5305 System Controller Module (P/N 1200831L1); Figure 4. Netvanta 5305 System Controller Module - ADTRAN NetVanta 5305 Hardware Installation Manual

NetVanta 5305 Hardware Installation Guide
3.

OPTION MODULES

The NetVanta 5305 family currently offers three option modules to meet networking requirements:
• NetVanta T3 Wide Module (P/N 1200832L1) on page 22
• NetVanta HSSI Wide Module (P/N 1200934L1) on page 23
• NetVanta Octal T1/E1 Wide Module (P/N 1202843E1) on page 24
The following pages describe each module, providing individual card specifications and features. Refer to
Appendix A on page 33
instructions.

NetVanta 5305 System Controller Module (P/N 1200831L1)

The NetVanta 5305 uses a central system controller module to provide configuration for the system using the
AOS. The NetVanta 5305 System Controller module (shown in
NetVanta 5305 system including a
on page 33 for the
C
ONSOLE
A system controller module is required for all NetVanta 5305 systems.
Features and Specifications
Interfaces
• Console: EIA-232 (DB-9 female) for access to CLI and monitoring
• Ethernet: Two 10/100Base-T interfaces (RJ-48) for connection to the LAN
Compliance
• EMC - see Electromagnetic Compatibility (EMC) Table on page
• UL/CUL 60950
• EN 60950
• IEC 60950
• AS/NZS 60950
Environmental
• Operating Temperature: 0°C to 50°C
• Storage Temperature: -20°C to 70°C
• Relative Humidity: Up to 95 percent, noncondensing
Physical
• Dimensions: 11.63-inch W x 8.63-inch D
61200990L1-34N
for pinout information. Refer to
port (DB-9) and two Ethernet interfaces (RJ-48). See
C
ONSOLE
connector pinouts, and

Figure 4. NetVanta 5305 System Controller Module

Copyright © 2010 ADTRAN, Inc.
Installing Modules on page 28
Figure 4) provides control interfaces for the
Table A-1 on page 33 for the Ethernet connector pinouts.
6.
Option Modules
for more installation
Table A-2
21