Hardware Installation Guide
3.
OPTION MODULES
The NetVanta 5305 family currently offers three option modules to meet networking requirements:
•
NetVanta 5305 T3 Wide Module (see page 19)
•
NetVanta HSSI Wide Module (see page 20)
•
NetVanta T1/E1 Wide Module (see page 21)
The following pages describe each module, providing individual card specifications and features. Refer to
Appendix A for pinout information. The Installing Modules section on page 24 provides information on
module installation.
NetVanta 5305 Controller
The NetVanta 5305 uses a central Controller card to provide configuration for the system using the ADTRAN
AOS. The NetVanta 5305 Controller (shown in Figure 3) provides control interfaces for the NetVanta 5305
system including a
C
ONSOLE
for the
connector pinout, and to Table A on page 27 for the Ethernet connector pinout. A Controller
C
ONSOLE
module is required for all NetVanta 5305 systems.
Features and Specifications
Interfaces
•
: EIA-232 (DB-9 female) for access to command line interface and monitoring
Console
•
: Two 10/100BaseT interface (RJ-48) for connection to the local area network.
Ethernet
Agency Approvals
•
FCC Part 15, Class A
•
UL 60950/CSA-C22.2 No. 60950
•
EN 60950
•
IEC 60950
•
AS/NZS 60950
•
EN 55022
•
EN 55024
Environmental
•
Operating Temperature: 0°C to 50°C
•
Storage Temperature: -20°C to 70°C
•
Relative Humidity: up to 95% non-condensing
18
port (DB-9) and two Ethernet interfaces (RJ-48). Refer to Table B on page 27
Figure 3. NetVanta 5305 Controller Module
© 2004 ADTRAN, Inc.
NetVanta 5305
61200990L1-34C