Mix Draft Control; Float Control; Lift Arm Top Limit Adjustment - Kubota M7-132 Operator's Manual

HYDRAULIC UNIT
Premium, Premium KVT models
(1) Depth control dial (hydraulic
dial)

7. Mix draft control

This will control the pull of the 3-point implement.
As the load on the 3-point hitch changes due to various
soil conditions, the draft control system automatically
responds to these changes by either raising or lowering
the implement slightly to maintain a constant pull.
Set the implement pull with the depth control dial
(hydraulic dial).
Standard, Deluxe models
(1) Depth control dial (hydraulic
dial)
194
(A) "FLOAT"
(B) "DOWN"
(C) "UP"
(A) "FLOAT"
(B) "DEEP"
(C) "SHALLOW"
(D) "UP"
3-POINT HITCH CONTROL SYSTEM
Premium, Premium KVT models
(1) Depth control dial (hydraulic
dial)
Adjusting the draft sensitivity:
During work in the draft mode, readjust the sensitivity
with the dial or switch according to the plowing depth,
the type of soil and other factors, referring to the
following table.
Draft ratio adjust-
ment dial Turn the dial coun-
(Standard, Deluxe terclockwise.
models)
Draft sensitivity ad-
Retract the bar
justment switch
graph leftward with
(Premium, Premi-
the (-) switch.
um KVT models)
Plowing depth Shallow
Type of soil Light
Field ruggedness Little
Sensitivity (Low)

8. Float control

Place the depth control dial (hydraulic dial) in the
"FLOAT" position (left-most) to make the lower links
move freely along with the ground conditions.

9. Lift arm top limit adjustment

Set for work in which a 3-point hitch top limit is
required.
For Standard, Deluxe models:
1. Turn the dial in the "HIGH" direction to increase the
top limit of the 3-point hitch.
2. Turn the dial in the "LOW" direction to decrease the
top limit of the 3-point hitch.
(A) "FLOAT"
(B) "DEEP"
(C) "SHALLOW"
(D) "UP"
Turn the dial clock-
wise.
Extend the bar
graph rightward
with the (+) switch.
Deep
Heavy
Much
(High)
M7-132,M7-152,M7-172