Status Leds - Christie Mirage M Series User Manual

LED color Status
Help key Only available in the On Screen Display (OSD) context; LED is Amber when the menu is being
displayed on the projected image display. When no menu is being displayed, the Help key is still
enabled if the OSD is enabled. It is only disabled when the entire OSD is set to OFF.
Auto key Enabled state when the power is ON, and there are no test patterns on the screen. If the power is
OFF or a test pattern displays, the Auto key is disabled.
Exit key Is determined in the specific context of the screen being displayed.
Input key Enabled when the power is ON. Disabled if the power is OFF.
Lens key Enabled when the power is ON. Disabled if the power is OFF.
Shutter key Enabled when the power is ON. Disabled if the power is OFF.
Menu key Always remains in the enabled state when the power is ON. If the power is off the Menu key is
disabled.
Soft key Used to select an action indicated by text above the key on the LCD. If no text is shown, the
associated key is disabled.

Status LEDs

Looking from the back of the projector, the LEDs represent, from left to right; Lamp 1, Lamp 2,
Power, and Status. The LEDs display the colors as shown below:
Projector states
Hard Boot
Standby Mode
Warm-up (Powering ON from standby)
Normal Operation
Cool-down
Error
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
LEDS LED state
All All LEDs amber—means please wait
Lamps 1 and 2 Off—lamps are off
Power Amber—AC is present but projector is off or
standby
Shutter Green—shutter is open
Amber—shutter is closed
All LEDs cycle green from left to right
Lamp 1 and 2 Amber—lamp time has expired and lamp should be
replace
Power Green—projector is powered up and operating
normally
Shutter Green—shutter is open
Amber—shutter is closed
All LEDS cycle from left to right
Lamp 1 and 2 Amber—lamp time has expired and lamp should be
replaced
Flashing Red—lamp has expired and lamp should
be replaced
Power Flashing Red—error has occurred. Details are
display on the status display.
Monitoring and Maintenance
112