Connecting Devices And Establishing Communication; Projector Head Connections And Status Leds - Christie CP4315-RGB Installation And Setup Manual

Connecting devices and
establishing
communication
To display content, you must connect a device that is capable of storing or playing content to the
projector.

Projector head connections and status LEDs

Understand the inputs on the projector.
A AES3 port for digital audio output.
B Linear Time Code (LTC) output.
C Output for multi-projector playback.
D Input for multi-projector playback (Christie IMB to Christie IMB only).
E SM and FIPS LED status indicators
F Indicates marriage status. In full power mode, a green LED indicates that the projector is properly
married and encrypted content can be displayed. A red LED indicates marriage is broken and
encrypted content cannot be displayed.
G Resets the projector electronics. After restarting, the projector returns to its previous power mode.
Cinema 4K-RGB Installation and Setup Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102710-08 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
33