FX-1/FX-1R Maintenance Manual
DANGER
[7]
ATC
7-1. Replacing the Air Cylinder
(1) Shut down the main air pressure to the machine main unit.
(2) Remove the ATC joint and SEMS cap bolts to detach the air cylinder.
(Also, disconnect the air tubes from the half unions.)
ATC joint
SEMS cap bolt
(3) Remove the half union and mount it on a new air cylinder. Reassemble the air cylinder and
other components in the reverse order.
To prevent any trouble caused by accidental machine start, always
shut-down the power before starting the maintenance and
adjustment work.
Figure 7-1-1 Replacing the air cylinder
Air cylinder
Half union
7-1
Rev. 2.00