Replacing The Ssd; Required Components - JUKI FX-1 Maintenance Manual

FX-1/FX-1R Maintenance Manual

12-4. Replacing the SSD

When replacing the SSD, it is absolutely necessary to prepare the following components, as well as
parameter files necessary to operate the FX-1/FX-1R main unit.
If you have updated any data, such as MS parameters, select [File] and [Control Date
Management...] from the menu bar to back up the data.
Additionally, it is also necessary to back up the production program files into a floppy disk.
You must always follow the instructions described in this manual when replacing the SSD.
Note) SSD: Solid State Driver

12-4-1. Required Components

FX-1/FX-1R Environment Disk (SSD)
For FX-1/FX-1R, this FX-1/FX-1R Environment Disk (containing the operating environment
for FX-1/FX-1R, such as Windows NT/XP or RTX, etc.) is absolutely required.
Language
Japanese
English
Chinese
Chinese
Japanese
English
Chinese
FX-1/FX-1R system program installation disks
These disks contain the software for the FX-1/FX-1R. All system programs for the
FX-1/FX-1R are saved into these disks. Japanese, English, and Chinese versions are
available. You may specify the same language as that used for the SSD.
Flexline DB installation disks: These disks contain the parts library database.
Table 12-4-1-1 SSD Part No.
OS Part name
FX-1 HARD DISK ASM (ST)
Windows NT FX-1 HARD DISK ASM (JE)
FX-1 HARD DISK ASM (CH)
SILICON DISK ASM XP (CH)
ENVIRONMENT DISK ASM (ST)
Windows XP
ENVIRONMENT DISK ASM (JE)
ENVIRONMENT DISK ASM (CH)
Par No.
L190E0210A0
L190E021AA0
L190E021BA0
40026591
40027675
40029775
40029774
12-8
Model
FX-1
FX-1R
Rev. 2.00