Gap Of Magnescale (Fx-1R) - JUKI FX-1 Maintenance Manual

FX-1/FX-1R Maintenance Manual

1-8-4. Gap of magnescale (FX-1R)

(1) Loosen the screw fixing the sensor and put the 0.3mm-thick tool in the gap between the
magnescale and sensor head.
(2) Tighten the screw and remove the 0.3mm-thick tool.
Figure 1-8-4-1 (YB-axis)
Figure 1-8-4-3 (YA-axis)
Figure 1-8-4-2 (X-axis)
1-14
Rev. 2.00