Replacing The Ya-Motor - JUKI FX-1 Maintenance Manual

FX-1/FX-1R Maintenance Manual

5-21. Replacing the YA-motor

5-21-1. Replacing the YA-motor
(1) Disconnect the motor relay cable
connector.
(2) Remove the bolts
protection cover
YA-motor bracket
(3) Loosen the bolt of the coupling
.
(4) Remove the YA-motor fixing bolt
from the YA-motor bracket
to detach the YA-motor
(5) Reassemble the components in
the reverse
disassembly, (4) to (1).
(6) For adjustment of the Z-phase of
the YA-ball screw, make the
adjustment using the procedures
described on the next page.
:
fixing the
from the
.
.
order of the
5-25
Figure 5-21-1-1
Rev. 2.00