Atc(Auto Tool Changer) Unit - JUKI KE-750 Setup Manual

4.

ATC(Auto Tool Changer) Unit

q Fix the nozzle on the ATC unit.
w Align the hole of the ATC base with that of the slide plate, then put the tie-up belt
through these holes.
and all nozzle cannot be removed.
e Cover the nozzle with air cap so that it cannot move, then paste adhesive tapes over
the air cap to fix them.
Air cap
Tighten the tie-up belt.
Nozzle
ATC base
Make sure that the slide plate is fixed
Slide plate
Figure4.1
- -
8
Tie-up belt
Hole