Adjusting The Check Cylinder Speed - JUKI FX-1 Maintenance Manual

5-15. Adjusting the Check Cylinder Speed

Lock nut
Pressure reducing valve
Speed controller
Adjust the check cylinder speed of the IN/BUFFER.
(1) Adjust the pressure reducing valve to 0.15MPa. (Adjust the pressure while turning ON and OFF
the cylinder.)
(2) Open the speed controller one and half rotations from its fully closed position.
FX-1/FX-1R Maintenance Manual
Clockwise rotation:
Decreases the pressure.
Clockwise rotation:
Makes the speed slower.
Figure 5-15-1
5-18
Rev. 2.00