Adjusting The Width Adjust Link Belt (In/Out) - JUKI FX-1 Maintenance Manual

FX-1/FX-1R Maintenance Manual

5-6. Adjusting the Width Adjust Link Belt (IN/OUT)

<Procedures>
(1) Loosen the bracket fixing bolts of the adjuster bracket R
idler pulley rightward or leftward
(2) Adjust the tension of the belt considering the interference with other parts.
(3) Measure the tension using a sonic belt tension meter (manufactured by UNITTA) and adjust it
to between 45 ± 5N.
(Weight=002.5, Width=009.0, Span=0260)
(4) After adjustment, tighten the adjuster bracket R .
Part name: WIDTH ADJUST LINK BELT L
Part No.: L171E521000
Measuring position
Figure 5-6-1
5-8
to move the tensioner pulley
Weaker Stronger
and
Rev. 2.00