Sticking The Label; Mounting The Board - JUKI FX-1 Maintenance Manual

FX-1/FX-1R Maintenance Manual

3-3-3. Sticking the Label

After the label sticking surface has been degreased, stick the label.

3-3-4. Mounting the Board

To mount the height sensor board 2 assembly, insert the connector into the head main board
completely and press the head main PWB cover from the top to secure it.
Figure 3-3-3 Left: label/right: label stuck
Head main board
assembly
Figure 3-3-4 Mounting the Board
3-6
HMS board 2
assembly
Rev. 2.00