Mcm (Multi Nozzle Control Module) Board (E9609729000) - JUKI FX-1 Maintenance Manual

FX-1/FX-1R Maintenance Manual

13-4-5. MCM (Multi Nozzle Control Module) Board (E9609729000)

[Functions]
This board controls the part centering sensors (MNLA).
Two 4-axis MCM boards for the MNLA (E9609729000) are used (for left and right heads).
[Switch settings]
MCMR (for Left)
ＭＣＭＲ（左）
S3
1 2 3 4
ON
MCMR (for Right)
ＭＣＭＲ（右）
S3
1 2 3 4
ON
[LEDs on front panel]
All LEDs are lit at start-up. After that, the "SEN PWR", "AB0". "AB1", "AB2", and "AB3" LEDs will
go off in that order. In the normal status, only the "+24" LED is lit.
[Adjustment items after replacement]
Follow the steps below to update the FLASH memory.
Select [Options] and [Change User Group], and then select [Serviceman].
Select [Maintenance] and [MS Parameter Setup].
Select [Others], [Version-up], and [MCM/MCMR].
S2
1 2 3 4 5 6 7 8
S2
1 2 3 4 5 6 7 8
13-11
S1
1 2 3 4 5 6 7 8
S1
1 2 3 4 5 6 7 8
Rev. 2.00