JUKI FX-1 Maintenance Manual page 6

Greasing
1. Regarding greasing, use Albania Grease.
2. To prevent the occurrence of an inflammation or rash, immediately wash the
related portions if grease adheres to your eyes or other parts of your body.
3. If grease is mistakenly swallowed, immediately consult a physician to prevent
diarrhea or vomiting.
Maintenance
1. To prevent accidents due to unaccustomedness, repair and adjustment shall be
conducted by maintenance engineers who are versed in the machine. In
replacing parts, use genuine parts of our company. We will not assume any
responsibility for an accident due to the use of non-genuine parts.
2. To prevent accidents or electric shock due to unaccustomedness, entrust electrical
repair or maintenance work (including wiring work) to persons versed in electricity,
or ask engineers of our company or its sales company to do it.
3. To prevent accidents due to unintended start-up of the machine, conduct repair or
adjustment only after removing air supply pipes and discharging residual air.
4. To prevent bodily accidents, confirm after such work as repair, adjustment, or parts
replacement that no screws or nuts are loosened.
Use Environment
1. Use the machine in the environment free from effects of noise sources (magnetic
waves), such as high-frequency welders, in order to prevent accidents due to
erroneous actions.
2. In order to prevent accidents due to erroneous actions, use the machine in the
environment where source voltage surpasses 200V (220V, 240V)± 10%.
3. In order to prevent accidents due to erroneous actions, do not use the machine in
the environment where the supplied air pressure is 0.5 to 1.0MPa.
4. To ensure safety, use the machine under the following environment:
Ambient temperature during operation
Relative humidity during operation
5. To prevent accidents due to breakdown of electric/electronic parts, turn on power
supply sufficiently after the fear of dew condensation is eliminated, because such
condensation may occur when the machine is rapidly moved from a cold place to a
warm location.
6. To prevent accidents due to breakdown of electric/electronic parts, stop the use of
the machine during lightning, and draw out the power supply plug.
CAUTION
+ 10°C - +35°C
50% or less (35°C)
90% or less (20°C)
IV