JUKI FX-1 Maintenance Manual page 4

To prevent accidents due to electric shock, turn off power supply if it is necessary to
open the electrical equipment box. For added precaution, open the lid of the box only
after a lapse of more than five minutes.
Basic Matters of Precaution
1. Be sure to read all documents included in this Manual and the attached booklet
before using this machine. Also, keep this Manual carefully so as to be able to
read it whenever necessary.
2. Contents of this Manual include items that are not included in specifications of the
machine purchased.
3. The machine should be operated only by the operator who has learned how to run
it.
4. Regarding the repair or maintenance (excluding daily inspection and other matters
specified in the Manual), ask our company or its agent to do it.
5. General maintenance, inspection, and repair (matters specified in this Manual) shall
be conducted only by specialized maintenance engineers who have finished the
maintenance course specified by our company.
With regard to repair (matters specified in this Manual), use genuine parts of our
company.
Safety Equipment, Alarm Label
1. In order to prevent accidents due to nonpresence of safety equipment, start to
operate this machine only after confirming that the equipment is suitably installed at
the specified position.
2. If the safety equipment is dismantled, be sure to attach it to its original position, and
confirm that it operates normally.
3. Make sure that the warning label stuck to the machine will be always clearly visible.
If it has been peeled off or stained, order new labels from our company and
exchange old labels with new ones.
4. If the safety equipment is damaged, remove it. Never operate the machine. If
you operate the machine without the safety equipment, it may lead to severe
accidents involving serious personal injuries or even death.
Application
1. Never use this machine for purposes other than its original application.
Our company will not be responsible in the case of its use for other application.
2. Do not remodel this machine. Our company will not be responsible for any
accident arising as a result of its remodeling.
Operational Training
1. To prevent accidents due to unaccustomed handling, operation of this machine
must be limited to operators who have participated in the operation training
specified by our company and have appropriate knowledge and operating skills.
DANGER
CAUTION
II