FX-1/FX-1R Maintenance Manual
13-8-2. Adjusting the Boards of the Head Unit
13-8-2-1. Adjusting the Head Main Board Assembly
(1) Switch Settings
The switches have already been set corresponding to the status of the board assembly.
DSW1
All switches are turned OFF before shipment.
This switch is used with all bits set at OFF.
DSW2
All switches are turned OFF before shipment.
This switch is used with all bits set at OFF.
VR2 VR3 VR4 VR5
VR1
13-33
Make the jumper switch W1
VR7
short-circuited.
DSW1
DSW2
DSW3
DSW4
Rev. 2.00