Replacing The Hod Lcd - JUKI FX-1 Maintenance Manual

FX-1/FX-1R Maintenance Manual

13-11-2. Replacing the HOD LCD

Follow the steps below to replace the HOD LCD.
L980E108000
L239E008000
(1) Remove the connector, FG crimp terminal, and LCD bracket fixing screws (at three locations).
(2) Remove the screws fixing the HOD LCD I/F PCB. (At this time, pay special attention so that
any flat washer and spring washer are not lost.)
TFT LCD monitor
LCD protector
13-46
Rev. 2.00