JUKI FX-1 Maintenance Manual page 132

FX-1/FX-1R Maintenance Manual
(8) The Microsoft TCP/IP Properties screen will appear. Select the [IP Address] tag.
Check on "Specify an IP address" and specify [IP Address] and [Subnet Mask].
If your company determines the rules about IP address setup, you must follow the
instructions given by the network administrator of your company.
If no rules are specified, set an IP address, which has not been set in other model connected to
the HLC. In this description, set [ 111.111.111.111 ]. Additionally, input [ 255.255.255. 0 ] to [Subnet
Mask]. When necessary, follow the instructions given by the network administrator to set up [Default
Gateway], [DNS], and [WINS Address].
(9) If the following message screen appears, select the [Yes] button.
12-16
Rev. 2.00