Replacing The Ejector - JUKI FX-1 Maintenance Manual

FX-1/FX-1R Maintenance Manual

6-2. Replacing the Ejector

(1) Shut down the main air pressure to the machine main unit and disconnect the cable
tubes and
(2) Remove the screw
(3) Remove the elbow unions
ejector.
(4) After the ejector has been replaced, reassemble the components in the reverse order.
The filter can be replaced without shutting down of the air supply.
Part No. 40000641
.
fixing the ejector to detach the ejector.
and
Part name Filter
from the detached ejector and mount them on a new
6-2
and air
Rev. 2.00