Adjusting The Occ Light Quantity; List Of Readjustment Items After Replacement - JUKI FX-1 Maintenance Manual

FX-1/FX-1R Maintenance Manual

4-6. Adjusting the OCC Light Quantity

<Procedure>
Check that the OCC light goes on with manual control.
Carry out "Adjustment of OCC Light" in the MS parameters. (See the section related to OCC
light quantity adjustment in the specifications for the MS parameter operation.)

4-7. List of Readjustment Items After Replacement

Table 4-7-1 List of Readjustment Items after Replacement
Focus adjustment
Filter adjustment
Light adjustment
Origin coarse adjustment
(Note)
OCC offset (Note)
Head offset (Note)
BMR offset (Note)
HMS offset (Note)
○: Mandatory
△: Check
−: Unnecessary
(Note) See the specifications for the MS parameter operation.
CAUTION
Camera
Light assembly
assembly
○ ―
△ ○
△ ○
○ ―
○ ―
○ ―
○ ―
○ ―
To prevent personal injury, do not put your hand inside the machine
or your face or head close to the machine during operation of the
HOD.
CCD camera
lens
○
△
△
○
○
○
○
○
4-6
Light board
Light filter
assembly
― ―
― ○
○ ○
― ―
― ―
― ―
― ―
― ―
Rev. 2.00