Replacing The Transport Pulley; Conveyor Pulley A: E21117150A0; Conveyor Pulley B: E20897210A0 - JUKI FX-1 Maintenance Manual

FX-1/FX-1R Maintenance Manual

5-2. Replacing the Transport Pulley

Two kinds of transport pulleys are available. If the mounting position is changed or the pulley is
mounted incorrectly, this may cause incorrect pulley rotation or incorrect alignment of the transport
belt, resulting in wear on the belt.
Always refer to relevant mounting procedure when mounting the transport pulley.

5-2-1. CONVEYOR PULLEY A: E21117150A0

Figure 5-2-1

5-2-2. CONVEYOR PULLEY B: E20897210A0

Figure 5-2-2
No. Part No.
1 E21117150A0
2 SB104000100
No. Part No.
1 E20897210000
2 SB104000100
5-2
Part name Q'ty
CONVEYOR 1
PULLEY A
Bearing 1
Part name Q'ty
CONVEYOR 1
PULLEY B
Bearing 2
Rev. 2.00