FX-1/FX-1R Maintenance Manual
13-4-8. I/O Control Board (40001943)
[Functions]
This board receives signals input from each sensor and outputs relevant control signals to other
boards.
This board also relays the cables to the MTC.
[Switch settings]
The jumper and DIP switches have already been set at delivery. However, check that they are set
as shown below before setting the I/O control board assembly in the control unit.
Jumper switches
→ Open
W3 (2P)
→ Open
W5 (2P)
→ Open
W6 (2P)
→ Short-circuit SW 1-4
W7 (2P)
→ Short-circuit SW 1-5
W8 (2P)
13-16
DIP switches
→
SW 1-1
OFF
→
SW 1-2
OFF
→
SW 1-3
OFF
→
OFF
→
OFF
→
SW 1-6
OFF
→
SW 1-7
OFF
→
SW 1-8
OFF
Rev. 2.00