Installing Other Optional And Replacement Components - Mircom TX3 Series Installation Manual

3.14 Installing Other Optional and Replacement
Components
The optional components are listed below. All the documents (for example
LT-5997) can be found on http://www.mircom.com.
RS-485. An RS-485 terminal lets you easily connect multiple Touch Screen and
lobby and card access controllers across a network. The RS-485 terminal
consists of + (positive), − (negative), and S (Shield) connections. See section
3.15 on page 94.
Camera. For instructions on installing an IP camera, see section 3.16 on
page 96.
Replacement 22" display. For instructions on installing a replacement 3M
Multi-Touch Display, see section 3.17 on page 99.
TX3-DELTA5 Card Reader. See section 3.18 on page 102.
TX3-GPM Guard Phone Module. See LT-972.
TX3-USB-AD Kit. See LT-6027.
TX3-WIEGAND-OUT. LT-6682.
TX3-CX-1NP Single Door Control Module. See LT-5997.
RPL-LK-WR Replacement Lockset for TX3-TOUCH-S15B-WR and
TX3-TOUCH-S15S-WR. See LT-6649.
TX3-TOUCH-WR-BB Mounting Box for TX3-TOUCH-S15B-WR and
TX3-TOUCH-S15S-WR. See LT-6912.
TX3-CF-003 Fan. For instructions on installing a fan in the 22" Touch Screen,
see LT-6074 Installing the Fan in the 22" Touch Screen.
Two door controller network board. See LT-981A.
Replacement lobby controller board. For details on the lobby controller board,
see LT-969.
RPL-SC-420002 Replacement display for TX3-TOUCH-S15B-WR and
TX3-TOUCH-S15S-WR. See LT-6656.
RPL-TOUCH-WR-WK Replacement Reader and Camera Window Kit for
TX3-TOUCH-S15B-WR and TX3-TOUCH-S15S-WR. See LT-6659.
TX3 Touch Screen Installation Manual
Touch Screen System and Setup
93