Nsl Resident Operating Instructions - Mircom TX3 Series Installation Manual

7.1

NSL Resident Operating Instructions

Mircom's state-of-the-art Touch Screen door entry system provides you and your
guest with an increased level of confidence and security.
Touch Screen operates with your existing telephone. Your guest dials your code
number or selects your name by scrolling through the visual directory on the
Touch Screen unit, causing your telephone to ring.
Note:
7.1.1 Granting Access
When you answer your telephone, you will be in communication with your
guest.
To unlock the main door
•
To unlock the auxiliary door
•
To refuse entry
•
•
7.1.2 Keyless Entry Codes
The keyless code is a confidential number assigned to each resident by the
building administrator to let you open the front lobby door without using a key.
To unlock the front door
1.
2.
150 TX3 Touch Screen Installation Manual
The telephone keypad numbers described in this chapter may be
different for your system. If the keypad numbers do not perform as
described, check with your building administrator to get the correct
values.
Press 9 on your telephone keypad. If your unit is assigned a specific code
for the main door then enter this code followed by the pound (#) key.
Press 6 on your telephone keypad. If your unit is assigned a specific code
for the auxiliary door then enter this code followed by the pound (#) key.
Hang up or
Press 4. If your unit uses a code for door entry, press 4 followed by the
pound (#) key.
Press 0. The keyless code prompt appears.
Enter the keyless code. The front door unlocks.
Resident Operating Instructions