Unload The Plate Or The Tube Assembly - Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual

Unload the plate or the tube assembly

SeqStudio Genetic Analyzer Instrument and Software User Guide
™
When the run is complete:
1. Touch
, touch
2. Press the release button on the autosampler to open the lid.
3. Remove the plate or tube assembly.
4. Close the autosampler lid: Press down on the center of the lid or press down on
both sides of the lid with equal pressure until the lid clicks shut.
5. Touch Retract plate, then close the instrument door when prompted.
Eject plate, then open the instrument door when prompted.
Chapter 7 Start and monitor a run

Unload the plate or the tube assembly

7
109