Assign Wells: Sample And Run Information - Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual

Assign wells:
Sample and run
information
SeqStudio Genetic Analyzer Instrument and Software User Guide
™
Chapter 5 Create or modify a plate setup from the Plate Manager
This feature is useful in secondary analysis software applications that organize
files based on amplicon and specimen information (Connect cloud-based
platform applications: Variant Analysis (VA) module, Next-generation
Confirmation (NGC) module; desktop applications: SeqScape
Variant Reporter ™ Software, Minor Variant Finder Software).
6. Click Next.
This procedure describes using the Plate view. Alternatively, you can click
keyboard short-cuts to enter information. See "Keyboard shortcuts for the sample
table" on page 72.
1. In the Plate screen, select one or more injection groups: Click a well to select one
injection group; shift+click or click+drag to select multiple injection groups.
Each set of 4 wells on the plate is referred to as an injection group.
The default injection order is: A1-D1, E1-H1, A2-D2, E2-H2....A12-D12, E12-H12.
2. If you are creating a mixed plate, select the Application type for the selected
injection groups.
3. (Optional) Edit the default Sample name (well) for each well.
Note: If multiple injection groups are selected when you edit the Sample name
or Sample type, both wells with the same capillary number are edited. For
example, if injection groups A1–D1 and E1–H1 are selected, and you change the
Set up a plate using default settings (Plate Manager)
5
™ Software,
and use
71