Required Safety Equipment - Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual

G
Appendix G Instrument specifications and layout
Safety requirements
Required safety
equipment
226
Your laboratory has specific safety practices and policies designed to protect
laboratory personnel from potential hazards that are present. Follow all applicable
safety-related procedures at all times.
The following safety equipment and protection from hazards must be available at the
installation site:
• Protection from any sources of hazardous chemicals, radiation (for example,
lasers, radioisotopes, radioactive wastes, and contaminated equipment), and
potentially infectious biological material that may be present in the area where
the service representative will work.
• Appropriate fire extinguisher:
– You are responsible for providing an appropriate fire extinguisher for use on
or near the equipment.
– The types and sizes of fire extinguishers shall be suitable for use on electrical
and chemical fires as specified in current codes, regulations, and/or
standards, and with approval of the Fire Marshall or other authority having
jurisdiction.
– The installation of appropriate fire extinguishers shall be in addition to other
fire-protection systems and not as a substitute or alternative to them.
• Eyewash
• Safety shower
• Eye and hand protection
• Adequate ventilation, including vent line/fume hood, if applicable
• Biohazard waste container, if applicable
• First-aid equipment
• Spill cleanup equipment
• Applicable Safety Data Sheets (SDSs)
SeqStudio Genetic Analyzer Instrument and Software User Guide
™